I was in need of a case for my Raspberry Pi Zero so looked around on Thingiverse for a suitable one. I wanted a simple case with no mechanical fasteners, just something to protect it and have easy “snap on” parts. I went with the model by cfunseth on Thingiverse, but soon realised it wouldn’t … Read more
Tag: 3D Printing
The steel frame of the P3Steel could easily scratch up any surface it sits on, and vibrations and movement may be translated down through it’s legs. I am building the printer on a table, so was very aware of scratching it(!) A look on Thinkgiverse shows a lot of different feet for the printer, but … Read more
Part of the frame assembly (or just after) is to fasten the y-axis motor mount and belt idler. They sit either side of each other at the two ends of the printer frame. This is where this 3D printers starts it’s path away from the standard version and takes on Toolson’s upgraded and improved parts.
Over the weekend while browsing through AliExpress for my usual random electrical stuff I came across two new listings for the frame of a P3Steel 2.5 DXL edition. Clicking through to them and viewing all the images noticed it was MY kitchen… THAT’S MY FRAME!
With the frame painted and dry, first thing to do is bolt together the main structure. It slots together like a jigsaw and there was absolutely no issues or problems in this process. All the bolts and nuts used to secure the main frame parts are M3 bolts and nylock M3 nuts. The RepRap Wiki suggests … Read more
The steel needs to be protected from the elements before it starts to rust – even if kept indoors the moisture from the air will begin to rust it. Because of this you need to either apply a protective layer of paint, use stainless steel which is less susceptible to rusting, or use galvanised steel. The cheapest option for me is to simply paint the frame, so that is what I did… read on!
What a great design, and simple print. Very easy to print and snapped together in a couple of clicks. The suspension design is genius and works really well. Went with the two tone tyres and swapped out the filament to white on the last few layers. Wheels clipped in well with the rims and work great.
This is the start of my build log of the Prusa i3 P3Steel, and the start to most of these kits – you need something to screw and bolt everything else to – a frame!
Time lapse of 3D printed Makerbot T-REX SKELETON from Thingiverse. This was a very cool print, and a long one at that! The model from MakerBot is perfect, and ideally set up for 3D printing.
Time lapse of 3D printed Colosseum. Time lapse taken from my Octoprint server attached to my Printrbot Simple Makers 1405 using the standard Raspberry Pi camera and a wide angle clip on lens. Original model is by CausalJoemama7 is on Thingiverse by MakerBot and can be found here – http://www.thingiverse.com/thing:962416. My make can be found … Read more