So, this step is optional, and whether or not you want to be able to control all your fans on your printer or not. To do this we will install the RAMPS 1.4 RRD Fan Extender – read on! On this printer, we have hooked up a hotend cooling fan (NOT the part cooling fan) which … Read more
Tag: core wiring
The RAMPS board is going to get very cramps, very quickly. It’s well designed and thought out in terms of layout, but as you add more and more connections to it, it’s going to get hidden beneath a nest of wires, connections, crimps and fans – say goodbye to your lovely clean clear red board!
Printing and assembly of the main hotend assembly – the hotend mount, cooling fan ducts and all hardware needed and connecting wiring.
Now that we have power to our RAMPS board – lets take care of it a little, and add in some active cooling to the board with a RAMPS Cooling Fan.
Behold the finished power supply cover printed in orange. I would show you the timelapse, but it looked so bad it looked like it was filmed in the Bat Cave!