Tag: Toolson

Anything related to author Toolson (on Thingiverse) aka Lars S. You can check out his bio on Thingiverse here – http://www.thingiverse.com/toolson/about, and also check out his own personal blog here – http://scheuten.me/ where you will get a more detailed account of his work.

Click on the following tag link if you are after my posts related to his work on the “Toolson Edition P3Steel 3D Printer“.


P3Steel Build Log (#06) – Y-axis Carriage Clamps

By chunkyadmin,

Bronze Bushings or LM8UU Bearings The standard Prusa builds (and most other 3D Printers, CNCs, engravers etc) use LMU88 linear bearings for all linear rod movements. They are the go to part when you use 8mm smooth rod as your axis guides and are cheap, easy to use and readily available. The quality of these  … Read more

P3Steel Build Log (#05) – Frame Feet

By ChunkySteveo,

The steel frame of the P3Steel could easily scratch up any surface it sits on, and vibrations and movement may be translated down through it’s legs. I am building the printer on a table, so was very aware of scratching it(!) A look on Thinkgiverse shows a lot of different feet for the printer, but  … Read more

P3Steel Build Log (#04) – Y-Axis Motor And Idler

By ChunkySteveo,

Part of the frame assembly (or just after) is to fasten the y-axis motor mount and belt idler. They sit either side of each other at the two ends of the printer frame. This is where this 3D printers starts it’s path away from the standard version and takes on Toolson’s upgraded and improved parts.

P3Steel Build Log (#03) – Main Frame Assembly

By ChunkySteveo,

With the frame painted and dry, first thing to do is bolt together the main structure. It slots together like a jigsaw and there was absolutely no issues or problems in this process. All the bolts and nuts used to secure the main frame parts are M3 bolts and nylock M3 nuts. The RepRap Wiki suggests  … Read more

P3Steel Build Log (#02) – Preparing and Painting the Frame

By ChunkySteveo,

The steel needs to be protected from the elements before it starts to rust – even if kept indoors the moisture from the air will begin to rust it. Because of this you need to either apply a protective layer of paint, use stainless steel which is less susceptible to rusting, or use galvanised steel. The cheapest option for me is to simply paint the frame, so that is what I did… read on!